Curtain pole Tip
- The perfect height visually elevates the window, improves light blocking, and allows the curtain to hang without letting in any side light.
- When measuring and installing anchors, allow for a width of 15 to 20 cm on each side and select anchors appropriate for the type of wall.
- Installation and inspection: Check alignment using a level, drill holes, insert anchors, tighten gradually, hang the curtain, and test the opening and closing mechanisms.
Placing the Curtain pole to 20 cm above the window frame instantly transforms the look of a room and improves light blocking. This elevation creates the illusion of a taller window, allows the curtain to hang perfectly, and prevents light from entering from the sides. This guide details measurements, the choice of fasteners based on wall type, a step-by-step installation method, final checks, and safety tips. It also highlights Nokomis service offerings Nokomis technical curtains and professional support. Ready to install an acoustic sheer curtain?

Why install the Curtain pole the doorframe?
So, how can you hang curtains in a unique way? Mounting the Curtain pole cm above the top of the window has three main advantages: aesthetic (creating a sense of height), functional (better light blocking and keeping the curtain away from the glass), and technical (reducing light leakage from the sides). This positioning is particularly recommended for rooms where you want to maximize the sense of space and control light, such as the living room, bedroom, or office.
Measurements and preparation before purchase
Measure the clear width of your window frame and note the height from the desired mounting height to the floor or to the desired bottom edge of the curtain. For the best look, allow for a 15â20 cm overhang on each side of the window. The length of the Curtain pole window width + 2 Ă overhang. For the drape (curtain folds), calculate a fabric width equal to 1.5 to 2 times the width of the Curtain pole the desired effect.
Tool Checklist
- tape measure and pencil
- drill and appropriate drill bits
- spirit level
- screwdriver or power drill
- anchors suitable for the type of wall
- hammer, vacuum cleaner for dusting
- a safe ladder or step stool
Selection of anchors and approximate load capacity
The choice of anchor depends on the wall material and the total weight of the curtain. Here are some general recommendations for each type of surface:
| Wall type | Recommended anchor | Approximate load per point (kg) |
|---|---|---|
| Drywall | Molly screw or toggler | 40â60 |
| Hollow brick | Expansion anchor for recesses | 50â90 |
| Solid concrete | Hammer-in anchor or chemical anchor | 150â250 |
| Solid wood | Self-tapping screw (pre-drilled) | 80â120 |
Positioning the brackets and drilling
Position the brackets 10â15 cm from the ends of the Curtain pole add an intermediate bracket every 120 cm or depending on the weight of the curtain. Mark the points with a pencil, checking for horizontal alignment with a level. Drill holes to the diameters recommended by the dowel manufacturer, remove any dust, insert the dowel, and then screw in the bracket. Tighten gradually to avoid crushing or deforming the Curtain pole.
Tip for a perfect level
To ensure that the Curtain pole straight, use a continuous reference line (such as a plumb line or a laser level) to mark the positions. Check the alignment after screwing in each bracket. If there is a slight misalignment, loosen the screws slightly, make adjustments, and then gradually tighten them again.
Installation of the curtain and final inspection
Before hanging the curtain, thread the grommets or hooks onto the Curtain pole place it on the brackets. Check the hem and the pleats to ensure the fabric drapes smoothly. Open and close the curtain several times to verify that it moves smoothly. Measure the final height to ensure the bottom of the curtain reaches the desired height (on the floor, flush with the floor, or slightly below, depending on your aesthetic).
Safety Tips and Best Practices
- Use a sturdy stepladder and have a second person help hold the Curtain pole you secure it.
- Check for hidden electrical cables or wires before drilling (a metal detector is recommended).
- For fragile walls or heavily loaded rods, consider reinforcing them with a support plate or mounting them on a wooden stud.

Nokomis Service Nokomis Technical Curtains and Installation Assistance
Nokomis a range of acoustic and thermal curtains made in France, designed to meet the needs of both homeowners and businesses. The soundproof curtains help reduce noise pollution while maintaining an elegant appearance. Nokomis also Nokomis acoustic sheers that let light through while reducing interior echoes.
Support and guarantees
The brand offers options for remote or on-site measurements, a customized quote, and installation by qualified technicians. Services include adjusting the valance, checking the fastenings, and finishing touches. Nokomis warranties on materials and labor, as well as maintenance tips to extend the life of the fabrics.
Installing the Curtain pole cm above the window is both an aesthetic and practical choice that improves light control and creates a sense of space. Take careful measurements, choose anchors suitable for your wall type, and follow the drilling and installation instructions provided to ensure a long-lasting result. If you prefer to have professionals handle the installation, Nokomis a complete solution: consultation, supply, and installation with warranties. By following these steps, youâll achieve a sturdy, straight, and visually appealing installation.